Arisun Green Veneer Clipper
ARISUN CLIPPER FOR GREEN VENEER CUTTING
Automatic green veneer clipper CHANG I is special designed for random core green veneer thickness from1.2 mmto 4.5 mm.
From in feeding though edge detecting system. Using NC electronic detector controls counter system and clipper, automatic. Separate. There is a whole automatic production processing. High-accuracy, High-efficient production of plywood.
Model |
GVC-1350 |
Working Veneer Width (mm) |
900~1270 |
Working Veneer Length (mm) |
900~1600 |
Working Veneer Thickness (mm) |
1.2~4.0 |
Length of Knife (mm) |
1350 |
Feeding Speed (M/Min) |
30 |
Defect Detecting by Sensor |
08/Pcs |
FEATURE
1. With rewinding infeed end guide device veneers are parallel clipped.
2. Material saving: Automatic NC clipper reduces wastage and increases recovery rate.
3. Save labor: Operating is very simple; it does not need any skillful worker to operate and one or two workers are available.
4. The edging system made the output veneer steady & straight.
5. Easy to adjust, changing knife.
6. Operating direction can be arranging according to the user requirement for the process of their production line.
Customized special type
-Green Veneer Clipper with Auto Stacker-